How to Turn On Your Fireplace
1. Ethanol Fireplace (Smart Bio Ethanol Burner)
To turn on your ethanol fireplace, follow these steps based on the product manual provided:
1. Ensure Proper Setup:
- Make sure the burner is installed correctly and placed on a stable, non-flammable surface.
- Check that there is sufficient bioethanol fuel in the tank (refer to the capacity table in the manual for your model).
2. Power On:
- Connect the power adapter to the burner and plug it into a power source (110–240V / 50–60 Hz).
- Make sure the push button is with lighting
3. Ignite the Flame:
- Use the "remote control" or "Wi-Fi app" or "Push button" to ignite the burner.
- On the remote control or app, press the "ON" button. The burner will automatically ignite, and you can adjust the flame size as desired.
4. Safety Checks:
- Ensure there are no flammable objects near the fireplace.
- Do not refill fuel while the burner is operating or still hot.
2. Vapor Fireplace (Mist Fireplace)
To turn on your vapor fireplace, follow these steps:
1. Prepare the Water Tank:
- Fill the water tank with clean, filtered water to ensure optimal mist performance.
- Avoid overfilling to prevent spillage.
2. Power On:
- Plug in the vapor fireplace to an electrical outlet (ensure compatibility with 110–240V / 50–60 Hz).
- Turn on the main power switch.
3. Activate Mist and Flame Effect:
- Use the "remote control" or built-in control panel to activate the unit.
- Press the "ON" button to start generating mist and LED flame effects.
- Adjust flame brightness or mist intensity using the controls.
4. Safety Check:
- Ensure proper ventilation in the room.
- Regularly check water levels and refill as needed.
---
Additional Tips for Both Types:
- Always refer to your specific model’s manual for detailed instructions.
- Keep children and pets away from operating fireplaces.
- For troubleshooting issues, consult the troubleshooting guide in your manual or visit [www.sefireplace.com](http://www.sefireplace.com) for support.